Kinematica - Homogenizing perfected.
Kinematica is been leading in the field of dispersing and homogenisation processing for both laboratories and production plants since 1962.
Kinematicas broad portfolio of products can address almost every dispersing application for the pharmaceutical, cosmetic, chemical, food and biotech industry.
Kinematica™ Hammer Grinding Attachment for Polymix™ MFC 90 D Mill
Consists of a rotor with three hardened strike hammers and a grooved stator. During the grinding process, the sample is spun around the grinding chamber and struck until the desired particle size has been achieved. The ground sample passes through the sieve into the collection container.
Kinematica™ Polytron™ PT 10-35 GT Homogenzier Drive Unit
Compact,economical homogenizer with 1200 W motor for processing larger samples. Versatile design allows for samples as small as .1 ml and up to 4500 ml with appropriate dispersing aggregate. Over 25 aggregates are available for almost any dispersing or homogenizing application.
Kinematica Polytron™ PT 1300 D Manual Disperser
Choose the KINEMATICA Polytron PT 1300 D for your lab. This versatile hand-held homogenizer combines quality, convenience and high performance for rapid, reproducible sample processing and consistent sample-to-sample uniformity.
Kinematica™ Stodger for Polymix™ MFC 90 D Mill
For active insertion of fibrous materials, which do not reach the grinding chamber due to their weight
Kinematica™ Polytron™ PT1200E Handheld Homogenizer
This ergonomic handheld homogenizer is lightweight and therefore ideal for rapid turn-around of smaller sample volumes. For sample volumes 0.05 ml to 250 ml.
Kinematica™ Polymix™ PX-MFC 90 D Hammer or Cutting Mill
Polymix™ MFC 90 D features easy to change grinding attachments and sieves extending the range of samples that can be processed. Simple handling, high user safety and efficient grinding results are just a few of the advantages of this mill.
Kinematica™ Polytron™ PT 6100 D Benchtop Homogenizer Drive Unit
This instrument meets the highest standards of reproducibility for scaling up, and the 1600W motor enables the handling of larger quantities without any decline in quality. Digitized control and regulation system is very easy to operate. Illuminated LCD display, with membrane keypad.
Kinematica Polytron™ PT3100D Homogenizer Motors
For applications requiring high reproducibility and scaling up. The fully digitized control and regulation system is very easy to operate. The illuminated LCD display shows all the parameters, which can be changed with the membrane keypad.
Kinematica™ Blade Grinding Attachment for Polymix™ MFC 90 D Mill
Consists of 3-armed rotor with cutting knives and stator with 3 cutting bars / tool included
Kinematica™ Stainless Steel Sieve for Polymix™ MFC 90 D Mill
Depending on the sample, even finer results can be achieved by grinding with two or more sieves with progressively smaller hole sizes.
Kinematica Polytron™ 2500E Homogenizer
Versatile units combine quality, convenience and high performance for rapid, reproducible sample processing and consistent sample-to-sample uniformity
Kinematica™ Security Lid for Mixing Attachment
Shatter proof protective glass adds an extra layer of protection
Kinematica™ Mixing Attachment for Microtron™ MB 550 Laboratory Mixer
For the mixing, dispersing, homogenizing, emulsifying and size reduction of cuttable materials.
Kinematica™ 12 mm W-Design Aggregate for Polytron™ for PT 1200 E, PT 1300 D and PT 2500E Homogenizers
For use with Polytron™ PT 2500 E Stand Dispersion Unit.
Largest range of homogenisers and dispersing aggregates
Kinematica offers a complete range of immersion dispersers and batch homogenisers for use in the lab, pilot plant or production facility. Accommodating sample volumes ranging from 0.05 mL up to 10 L, powerful drive units combine with efficient dispersal aggregate tools to solve every application requirement in the pharmaceutical, chemical, cosmetic, food and life science sectors.
Standard dispersing aggregates come with the Kinematica EasyClean (EC) design, and rotor/stator geometries with two, four or six teeth rows. This is all you will need for most standard applications during the preparation of samples, formulation development and small scale production. Up to 20 mm diameter, the stator has embedded cutting teeth to optimise pre-crushing of the sample. An enclosed ring design provides optimum protection for the teeth and prevents bending and distortion.
About Kinematica
Kinematicas broad portfolio of dispersing and homogenising systems are based on our own rotor/stator technology. This dynamic mechanical system allows the processing of physical phases such as liquid-liquid, liquid-solid or liquid-gaseous to produce the finest dispersions, emulsions, suspensions and foams. The rotor and stator together comprise the generator, the critical core component whose selected geometries process the physical phases of the sample. Thanks to decades of experience, Kinematica can supply your industry with the broadest range of generators for a wide range of applications. What's more, specialised bespoke generator geometries can be designed, engineered and produced in close cooperation with you, our customers.
More